Tools List¶
Required tools for assembly of your machine:
- Metric Ball-End Allen Wrenches:
- 2.5mm, 3mm, 4mm, 5mm, 6mm
- Imperial Allen Wrenches:
- 3/32", 1/4"
- Adjustable Wrench
- Standard (Flat Tip) Screwdriver
- (2) Clamps
- 6" C-Clamps recommended
- Tape Measure
- Utility Knife
Additional recommended tools and supplies:
- 6mm Hex Ball-end Power Bit and Drill/Impact Driver
- Metric Combination Wrenches:
- 8mm, 10mm, 13mm, 16mm, 17mm
- Metric Tape Measure
- Threadlocker (Loctite Blue 242)
- Dimensional Lumber (refer to Step 1.2.3.4Step 1.2.3.4)
- (2) 24" Hand Trigger Clamp
- Cable Ties
This page intentionally left blank