Skip to content

Avid CNC Post and Tools for SheetCam


Software Downloads

Choose a download below based on the Hypertherm torch model you will be using.

Each download includes the Avid CNC Post Processor for SheetCam and toolsets for all compatible mechanized consumables, including FineCut.

Hypertherm Powermax SYNC torches
For SYNC consumables

Torches Avid CNC Post Processor and SheetCam Toolsets
Powermax 65 SYNC
Powermax 85 SYNC
Powermax 105 SYNC
SheetCam Post and Powermax SYNC Tools v1.7.1
(current release)
Does not include SheetCam software.

Hypertherm Powermax Duramax torches
For Duramax consumables and SYNC consumables with cartridge adapter

Torches Avid CNC Post Processor and SheetCam Toolsets
Powermax 45XP
Powermax 65
Powermax 85
Powermax 105
SheetCam Post and Powermax Tools v1.7.1
(current release)
Does not include SheetCam software.

Note

After downloading, return to the SheetCam Software Setup Guide.

Mach4 Compatibility

Important

Avid CNC Post and Tools for SheetCam v1.7.1 requires the use of Mach4 with Avid CNC v2.3.0 or newer.

Release Notes

  • Version 1.7.1 (3.11.2022)
    • Mach4 Compatibility: Requires use of Mach4 with Avid CNC v2.3.0 or newer
    • New: Toolsets specific for Hypertherm torch model and consumable type
  • Version 1.7 (9.14.2021)
    • Mach4 Compatibility: Requires use of Mach4 with Avid CNC v2.3.0 or newer
    • New: Restart points in G-Code
    • Update: Custom M codes (m300X) used to set work offsets and compensate for THC motion between cuts
    • Update: Move mechanical switch offset from post options to m3003 macro
    • Update: Set pierce delay using m2020 macro
  • Version 1.6 (10.19.2020)
    • Mach4 Compatibility: Requires use of Mach4 with Avid CNC v2.2.0 or newer
    • New: Fine cut toolsets
    • New: Post processor version in G-Code header
    • Update: Add motion command after torch off command
    • Update: Path rules applied to new SheetCam operations by default
    • Bugfix: Missing tool in Powermax 105 toolset
  • Version 1.4 (6.16.2020)
    • Update: Revised install location for .tools files
  • Version 1.3 (3.6.2020)
    • Update: By default, allow different path rules for each operation
  • Version 1.2 (1.17.2020)
    • Bugfix: Post processor not installed in custom SheetCam installations
  • Version 1.1 (7.11.2019)
    • Bugfix: Full tool list not available for all Hypertherm torch models
  • Version 1.0 (7.2.2019)
    • Initial release of Avid CNC's post processor and tool lits for SheetCam