System Requirements¶
Size Requirements¶
Power Requirements¶
NEMA 23 CNC Controller:
- Input power: 100-120VAC or 200-240VAC, 50/60Hz
- Voltage range must be setVoltage range must be set on main power supplies. They will be pre-configured for 100-120VAC, unless the system was specifically ordered for 200-240VAC power.
- Current draw (approx.): 6A @ 120VAC, 3A @ 240VAC
NEMA 34 CNC Controller:
- Input power: 100-120VAC or 200-240VAC, 50/60Hz
- Voltage range must be setVoltage range must be set on main power supplies. They will be pre-configured for 100-120VAC, unless the system was specifically ordered for 200-240VAC power.
- Current draw (approx.): 12A† @ 120VAC, 6A @ 240VAC
† The C13 type input power socket is rated for 15A in North America and 10A in most international regions. In those regions the Plug & Play Controller should be powered with 200+ VAC.
Plug and Play Spindle / VFD Systems:
Please see the Power Requirements section in our Plug and Play Spindle / VFD Manual.