Section 3: Z-Axis Installation¶
Parts and Tools Required¶
QTY | Part/Description | Packaged In |
---|---|---|
1 | CRP840-00-200 - PRO Linear Ballscrew Axis | Z Axis |
1 | CRP940-00-FAST | CRP900-00-XXXX-HW |
(8) M8 x 25mm Flat Head Screw | ||
(8) M8 Slide-in T-Nut |
- Required Tools:
- 3mm Allen Wrench
- 5mm Allen Wrench
3.1 Z-Axis Installation¶
3.1.1¶
- Remove the moving plate from the Z axis.
3.1.2¶
- Remove the metal dust cover screws from the Z axis and set them aside.
3.1.3¶
- Remove the metal dust covers from the Z-Axis.
3.1.4¶
- Slide the M8 T-Nuts into the gantry plate and install the Z-axis to the gantry.
3.1.5¶
- Tighten the indicated bolts.
3.1.6¶
- Slide the metal dust covers back on the Z axis as indicated.
3.1.7¶
- Attach the metal dust covers using the screws removed in previous steps.
3.1.8¶
- Attach the moving plate to the Z axis using the screws removed in previous steps.