System Identification¶
Plug and Play Spindle / VFD Systems produced after November 1, 2021 can be identified using the serial number located on the inside of the VFD control box lid.
* VFD ID included in serial number starting mid-February 2022.
Info
If your Plug and Play Spindle / VFD System was produced prior to November 2021 and does not contain a serial number in the format shown above, use the following model revision and VFD ID when referencing technical documentation in this manual.
| Spindle Type | Model Revision | VFD ID |
|---|---|---|
| Avid CNC 3 HP | 20.1.X | A1 |
| Avid CNC 4 HP | 21.1.X | A1 |
| Avid CNC 8.7 HP | 21.1.X | C1 or D1 |